SETTING UP TEMPERATURE AND RESISTANCE TESTS
1. To enter the temperature value and set up resistance tests, click on either the
Manual
or
3
Lead High V
button.
2. The Temperature/Resistance Test screen appears so you can provide the information needed for
your test.
3. Using this screen, you can enable or disable temperature entry or resistance testing, select
specific parameters to include in your testing, or adjust testing parameters to fit your needs.
Preparing For Testing
Figure 12. Temperature/Resistance Test setup screen.
4. The Test Results section shown at the bottom of the screen provides a view of the results
collected when the test runs automatically or semiautomatically. You can also use this section
directly during manual testing.
5. When you have completed your setup, close the screen.
www.megger.com
11
