CREATING A NEW TEST ID
If a Test ID does not exist for the motor you want to test, you can create a new one for current and
future use.
1. Click on the
Tests
tab.
2. Click on the
Edit Test ID
checkbox to enter edit mode.
3. Test IDs can be password protected if desired. If a password has not been set up and you want
to use one, enter a new one in the
Password
field. To change a password, click on
Change
Password
, type in the current password (if applicable), enter the new password and confirm
then click on
Set Password.
4. Click
OK
to close the password dialog box.
Figure 7. Setting a password within the Tests tab.
Preparing For Testing
www.megger.com
7
