SELECTING TESTS AND SETTING UP TEST PARAMETERS
As noted in the process for creating a new Test ID, you can select which tests you want to run for
a selected motor by clicking on the
ON/OFF
buttons for each test type. You can also view and
configure parameters for each test type by clicking on the buttons in the right column for each test
type.
Figure 11. Selecting tests to perform, and controls for configuring or viewing test parameters.
The following sections provide brief introductions to each test setup screen.
For details on the screens and the parameters set within, refer to the AWA-
IV user manual.
NOTE
Preparing For Testing
Baker AWA -IV Static Motor Analyzer
www.megger.com
10
