Safety Instructions
Before using equipment, read the following safety and operating instructions to ensure your own personal safety
and help to protect your equipment. Failure to do so could result in injury or death.
Connected equipment may require additional safety instructions. Observe all safety instructions for additional
equipment connected before operating.
General Safety
Before setting up the equipment:
• Read the operating instructions carefully and ensure you understand how to use the equipment correctly.
• Installation and testing must only be completed by those suitably qualified.
• Inspect the working environment and ensure it is clean and clear of hazards before removing equipment from
packaging and positioning the system.
• Visually check all equipment for damage. If damaged, contact your local Meech representative before
continuing.
• Observe warning symbols placed on the equipment, see page 5.
• Ensure a minimum distance of at 0.5m is kept around the Air Handling Unit (AHU) to permit adequate airflow
required for ventilation. Restricting airflow may damage the equipment.
• Keep all cables secured until ready for use.
• Keep a copy of the Operating Manual close to the system at all times.
Electrical Safety
Before installing, performing repairs or maintenance on equipment, ensure the system is electrically isolated. Failure
of this could result in injury or death.
Before working on the equipment:
• Check the equipment is electrically isolated correctly.
• Check equipment and cables for damage. If damaged, contact your local Meech representative before
continuing.
• Ensure all wiring is completed by competent personnel.
• Check all connections in relation to the wiring diagram.