28
Positioning of 924IPS Bars
The 924 is a short to mid-range bar. Dependent on the application, the bar will be mounted between 20mm and
150mm from the target surface.
The bar should be mounted securely, using all the M4 T-bolts provided with the bar.
Correct positioning of the bar is vital for effective static control. There must be no metallic objects or obstruction
between the bar and the material. The diagram shows the area that should be kept clear.
When installed at short range over a web or sheet, the bars must be positioned away from surfaces and rollers, as
shown in the following diagram.
1
1
2
2
3
3
4
4
5
5
6
6
A
A
B
B
C
C
D
D
Meech International
2 Network Point
Range Road, Witney
OX29 0YN, UK
Tel: +44 (0) 1993 706700
Fax: +44 (0) 1993 776977
email: [email protected]
web: www.meech.com
'Meech International' is a trading style
of Meech Static Eliminators Ltd
TITLE :
DRAWING NO:
MATERIAL :
FINISH :
TOLERANCE UNLESS OTHERWISE SPECIFIED
Machined Work Metric ± 0.1mm
Unmachined Fabrications ± 1mm
Angular ± 0°30'
DIMENSIONS IN MM DO NOT SCALE
CRITICAL TO FUNCTION (CTF)
DIMENSIONS AS MARKED
PROJECTION
SHEET
A3
SCALE
DATE :
20/04/2020
REVISION :
SHEET :
1 / 1
DETAIL :
DRAWN BY :
CHECKED BY :
SIGNED OFF BY :
COPYRIGHT © MEECH STATIC ELIMINATORS LTD 2020
THIS DOCUMENT AND THE INFORMATION THEREIN IS THE PROPERTY OF MEECH INTERNATIONAL AND SHOULD NOT BE COPIED IN WHOLE OR USED FOR MANUFACTURE OR OTHERWISE DISCLOSED WITHOUT THE PRIOR WRITTEN CONSENT OF MEECH INTERNATIONAL.
Your Meech distributor will be able to assist with questions regarding positioning of your equipment.