7
EN
Installation
We recommend that you have the installation of the device made by skilled worker.
You will ensure that the device will function faultlessly with this. Incorrect cabling can
lead to damage to the device or to your car. Read the installation and connection
information in this Introduction, if you wish to install your car radio yourself.
Disconnect the minus terminal on the car battery before installation.
There will be a danger of a short circuit and an electric shock
otherwise!
►
Check that the connection arrangement of your vehicle agrees with the
arrangement in the car radio.
►
Do not lay the cable under pressure, across sharp corners or close to parts that
can heat up. Pay attention that you do not bend or twist the cable.
►
Insert the unit into the proper shaft or select a location to install the unit that will
not affect the driver's ability to drive.
►
Connect the cable shortly before finally installing the device. Ensure that it has
been connected correctly and that the system works properly.
►
If changes have to be made to the vehicle, consult your vehicle dealer/specialist
workshop.
►
Your claim under guarantee will lapse if you have separated the adapter socket
from the cable or have cut off the cable!
►
Install the unit so that no injury can be caused during heavy braking.
►
Avoid the installation of the device close to high temperatures (e. g. direct solar
radiation or air from the heating), dust, dirt or excessive vibration. The device can
be damaged by these.
►
Keep precisely to the instructions in this Introduction during the installation.
Check all connections before you reconnect the car battery.