11
EN
Connection on the back of the radio
An overview of the back of the car radio:
1)
ISO socket block B (loudspeaker)
2)
ISO socket block A (electricity)
3)
10 A fuse
4)
Cinch outputs (loudspeaker/amplifier)
5)
Aerial socket
Preparing the cable connections
►
Pull the connections located in the ISO slot of your car out until they can be
connected with the connections on the car radio.
Making the cable connections
Use the ISO socket block of the car radio during installation. You will be able to buy a
corresponding adapter in specialist workshops, in the specialist trade or in the
specialist departments of department stores, if the ISO socket block of your vehicle
does not match the ISO sockets of the car radio.
Safe and correct electrical connections will be made with the two ISO sockets of
your vehicle (for the loudspeakers and for electrical connections). We explain
the significance of the cable individual at the end of this Chapter, if you wish, however,
to lay the cables individually.
►
Connect the aerial connector of the vehicle aerial to the aerial socket of the car
radio.
