22
Switching the Regional channel Mode on/off
Some stations transmit regional programmes at certain times.
►
Hold the
AF
button pressed down for longer than 2 seconds to switch the
Regional channel Mode on or off.
The
REG ON
visual presentation will appear in the display.
►
Wait until the visual presentation changes back to the radio display, to switch on
the Regional channel Mode.
REG ON
: The radio will only search within the respective region for stations with
traffic announcements.
REG OFF
: The radio will only search outside the respective region for stations with
traffic announcements.
Switching TA – traffic radio on/off
‘TA’ (‘Traffic Announcement’) is the Traffic radio Mode. Most of the stations that
transmit radio data signals transmit a signal before and after the traffic radio. If the TA
function has been switched on, other types of operation (e.g. USB) will be switched to
the radio immediately, if the car radio has received this signal. The volume will be
increased to 20 automatically during a traffic announcement, if the volume level is
under 20 or the mute setting has been activated. The volume level will be set back
after the announcement.
Stations that transmit traffic radio (‘traffic channels’) are indicated in the display by the
TP
symbol.
►
Press the
TA
button briefly to switch on the TA function.
Hold the
TA
button pressed down to start a ‘TA’ search.
TA
SEEK
will appear
in
the
display.
The
TA
symbol will appear above in the display if the function is switched on.
►
You can interrupt the process if the radio switches to a station with traffic radio
from a different type of operation or from a station without traffic radio. Press the
TA button
briefly. The TA function will now be interrupted, without switching off
the TA Mode.
The radio will occasionally switch to the EON connection station, if EON has found
traffic radio on a different channel.
Only stations that transmit a traffic radio signal can be found/stored during the
station search, if the TA function is switched on.
