13
EN
Control panel
Inserting the control panel
►
Push the control panel into the holders intended for it on the left of the frame,
with the retaining lug on the left edge of the back.
►
Press the control panel on the left side of the frame until it engages.
Check that the control panel is properly in place and secure. If the control panel is not
fitted properly, error messages appear in the display and/or several keys will not
function properly.
Remove the control panel
►
Press the
REL
button. The control panel will open.
►
Pull the control panel out of the holder carefully.
Anti-theft
When the panel is not attached, the LED anti-theft protection light will flash on
the unit.
Contacts
The contacts on the control panel and the radio will lie freely if the control panel has
been removed.
Pay attention that the freely lying contacts do not become dirty. The car radio
would not be able to function faultlessly then. Always keep the control panel in
the case for protection.
Clean the contacts with a clean, fluff-free and dry cloth if necessary.
Reset
►
Press into the
RESET
opening with a ball-point refill or another pointed object
before you bring the radio into operation for the first time.
►
Press into the
RESET
opening with a ball-point refill or another pointed object if
the car radio demonstrates a fault that cannot be removed by switching off and
on.
