medi Pcs brio, Руководство оператора

Страница: 22 / 28

22
Electromagnetic Compatability 8.7
8
Electromagnetic Capability
Troubleshooting & technical information
The medi pcs requires special precautions regarding EMC and needs to be installed and put into service according to the EMC
information provided in these accompanying documents.
WARNING: Portable RF communications equipment (including peripherals such as antenna cables and external antennas)
should be used no closer than 30 cm (12 inches) to any part of the medi pcs, including cables specified by the manufacturer.
Otherwise, degradation of the performance of this equipment could result.
WARNING: A risk of increased emissions or decreased immunity may result if any additional cables are attached.
WARNING: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are
operating normally.
WARNING: Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this
equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and
result in improper operation.
1
2
3 Emissions Test Compliance Electromagnetic Environment - Guidance
4
RF emissions
CISPR 11
Group 1
The medi pcs uses RF energy only for its internal function. There-
fore, its RF emissions are very low and are no likely to cause any
interference in nearby electronic equipment.
6
RF emissions
CISPR 11 Class B
7
Harmonic emissions
IEC 61000-3-2
Class A
Voltage Fluctuations
IEC 61000-3-3
Complies
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The medi pcs is intended for use in the electromagnetic environment specified
below. The customer or the user of the medi pcs should assure that it is used in
such an environment.
The medi pcs is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage power supply network that supplies buildings
used for domestic purposes.