Initial operation
Product testing
GA 5752 2806 GB 10
17
3
3
Initial operation
3.1
Product testing
DANGER!
Product testing!
Only product parts which are in perfect condition can ensure proper functioning of
the product. The product parts will thus have to be carefully inspected before
mounting.
Check whether all tubes are undamaged.
Check whether the unit has been properly cleaned and that there are no residues or soiling.
Do not use damaged components.
3.2
Connection to the terminal unit
3.2.1
General
NOTE
Please refer to the manufacturer’s instructions for the particular terminal unit for
information on connecting the gas probe to the terminal unit.
3.2.2
Version A
1
2
Fig. 3: Version A
Tapping unit with integrated gas pin
The tapping unit (1) is plugged directly into
the terminal unit (2).
