manualshive.com logo in svg

MEDAP FINA AIR, Руководство по эксплуатации

Поделиться
Скачать
MEDAP FINA AIR Скачать руководство пользователя страница 16

Safety notes

Product safety notes

16

GA 5752 2806 GB 10

2

WARNING!

Impacts!
Impacts may cause damage to sensitive, precision mechanical components.
Do not expose the product to impacts.

WARNING!

Non-permissible load!
If the permissible load is exceeded, leakages may occur at the connection between 

terminal unit and probe.
In accordance with DIN EN ISO 9170-1, the overall weight of the product and 

accessories may not exceed 2 kg.

CAUTION!

Malfunction!
Ensure that the connection between the product and the accessory is leak-free.

CAUTION!

Observe ambient conditions!
The precision, operation, mechanical stability and tightness of the product cannot 

be guaranteed if the maximum upper and lower ambient temperatures are 

exceeded.

DANGER!

Infection hazard!
During aspiration, use a hydrophobic bacterial or viral filter in order to keep 

contamination from entering the unit.

CAUTION!

Property damage!
Exposure to UV rays can cause material fatigue. The stability would no longer be 

ensured.
Do not expose the product to strong UV light.

Содержание FINA AIR

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды