Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 6 / 30

3
1.4 Feature Summary
● KSR-01IP supports extended frames and long telegrams up to 240 bytes APDU
length. With all other system devices i.e. couplers and interfaces suporting long
messages e.g. for energy metering applications and visualization purposes can be
processed.
● KSR-01IP favourably replaces a common TP line/area coupler. The great
advantage is using KNX IP as a fast KNX backbone medium (for sending telegrams
between lines and areas).
● KSR-01IP works without external power supply.
● Providing IP Tunnelling to the ETS connection interface (also other tools to enable
commissioning and monitoring) the additional tunnelling addresses are not the
same used for ETS connection. Four different tunnelling connections with a
separate address for each can be realized in parallel.
● ACK sending on sent out messages is ETS configurable.
● When there is no IACK response on the subline KSR-01IP is able to repeat
messages up to three times. Repetitions can be configured for both Physical
Telegrams and Group Telegrams via ETS (to ease troubleshooting). After an IACK
response no repetition is following and the negative IACK/BUSY failure
mechanism is maintained.
● Automatic function for switching back to run-time telegram filtering after
configurable suspension period (see Manual Mode). This avoids forgetting the
reactivation of filtering.
● For an ETS configurable time period, it is possible to switch off telegram filtering
by only pressing a button on the device front panel. Without additional ETS
download filtering is suspended. This is necessary for running fast diagnostics on
site.
● Temporarily suspending telegram filtering eases commissioning and debugging.
Without ETS download temporary access to other lines becomes possible.
● UPnP is available to discover the device within the IP network. This can only be
realized by a proper network installation in terms of topology. With use of
KNXnet/IP ETS is able to recognize the communication interface device.
● Updating the firmware can easily be accomplished by a Web browser. The
available Web front-end provides informative settings and enables to switch the
device into Program Mode without use of the Program Button.
● In networks with high busload the internal amount of communication buffers are
capable of smoothing peeks in the communication load course.
● KSR-01IP's ETS database entries are available for ETS4 and later.
● KSR-01IP supports KNXnet/IP, ARP, ICMP, IGMP, HTTP, UPnP discovery, UDP/IP,
TCP/IP, DHCP und AutoIP.