Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 10 / 30

7
Example: If an IP router with address 1.0.0 already exists on the backbone no IP
router with address 1.X.0, 1≤X≤15 can be added here. Even if no line coupler with
address 1.1.0 exists on the subline of the 1.0.0 IP coupler. Vice versa, if a line
coupler with address 1.1.0 already exists in the installation no IP router with address
1.0.0 can be added.
3.4 Programming
3.4.1 Program Button
To download the desired physical address or an ETS setting the Program Button
must be pressed first. Successive pressing the Program Button will turn on and off
the Program Mode. LED A7 lighting in red colour indicates Program Mode is active.
When Program Mode is active ETS recognizes the device of interest for
downloading.
Note: A blinking red Programming LED indicates the Ethernet cable is not properly
con nected.
Note: Even when Boot Mode is active successive pressing the Program Button will
turn on and off Program Mode and Programming LED.
Figure 3: KSR-01IP Network Topology
KSR-01IP KSR-01IP KSR-01IP
KSC-01L KSC-01L
Subline Subline
Mainline
IP Area
IP Backbone
TP Line
TP Area
Ethernet
+ + +
+ + + +
- - -
- - - -
1.0.0
1.2.0 1.1.0
2.0.0 3.1.0
+ + + + - - - -