Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 4 / 30

1
1.Product Description
The KNX IP Router KSR-01IP works as a KNX line/area coupler to provide a bi-
directional data connection between KNXnet/IP line (main line) and KNX TP line
(subline). KNX IP and KNX TP are coupled having a galvanic isolation in between.
The flexible KSR-01IP can be used as a KNX TP line coupler to connect several KNX
TP lines but also as a KNX TP area coupler to connect several TP areas or different
KNX TP installation systems via an IP Backbone/Ethernet/Internet. Telegram
filtering is accomplished according to the installation place in the hierarchy
(Physical Telegrams) and according to the built in filter tables for group
communication (Group Telegrams). For detailed diagnosis all operational
modes/states are shown by a duo-LED display.
With the ETS (or compatible commissioning tool) KSR-01IP also works as the KNX
programming interface having no KNX communication objects for itself. Connecting
a personal computer to the KNX TP bus can ideally be done via Ethernet/Internet.
For Tunnelling and Routing up to four tunnelling addresses can be used. To ease
commissioning and troubleshooting the Manual Function for short-time telegram
filter switch-off and special routing/repetition/confirmation settings are available. A
comfortable Web front-end to watch the busload history, to identify KSR-01IP in a
network and to update the firmware via IP is provided.
Note: In this document, physically addressed telegrams are named Physical
Telegrams Note: In this document, group oriented telegrams are named Group
Telegrams.
1.1 Front Panel
Figure 1: Front View
Front Panel Elements :
+
-
+
-
KS R- IP 01
KNX IP Router
I
Function
Bus State
IP TP
Traffic
GA PA
Prog
.
ME
U
AD
E I
N
A1
A3
A5
A7
A2
B1
A4
A6
B2
B3
B4
A1 :
State IP (Main line)
A3 :
Telegram traffic IP (Main line)
A4 :
Telegram traffic KNX TP (Subline)
A5 :
Group Address routing
"*"
A6 :
Physical Address routing
A7 :
Programming
B1 :
Ethernet connector
B2 :
Function button
B3 :
Program button
B4 :
KNX TP connector
* only group telegrams with main groups 0…13
A2 :
Bus state KNX TP (Subline)