Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 13 / 30

10
3.5.4 LED Status Display
Table 2: LED Status Display for Manual Function
Table 3: LED Status Display for Factory Reset after first Button Press
Table 4: LED Status Display for Boot Mode
4.ETS Database Parameters
All screen shots are related to the KSR-01IP database file R2-1g in ETS5.
4.1 General
If the host name is changed by a download in ETS4, a manual device restart (bus
disconnection, reset of the line) is recommended to take over this change.
Figure 6: General Tab Parameters
Number
Number
Number
LED
LED
LED
Color
Color
Color
Comment
Comment
Comment
A1
A1
A1
State IP
State IP
State IP(Main line)
orange
orange
green
orange
blinking green
blinking green
green
orange
orange
orange
orange
red
Lights red if not connected
Lights red if not connected
not the same tempo as LED A2
Bus State KNX TP
Bus State KNX TP
State KNX TP(Subline)
Group Address Routing
Group Address Routing
Telegram Traffic IP(Main line)
Physical Address Routing
Physical Address Routing
Programming
A2
A2
A2
A5
A5
A3
A6
A6
A7