Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 23 / 30

To exit Boot Mode it is necessary to enter the Update tab of the Web front-end. Then
either the firmware update has to be completed (if a new firmware is available) or
the firmware update process has to be stopped by a click on the “Abort” button. After
that KSR-01IP restarts and continues with normal operation.
Step 1: Open the Update tab of the Web front-end.
Step 2: Activate Program Mode (at the KNX tab or by Program Button press ).
Step 3: After Program Mode activation give a short press to the Function Button .
Then click on the “refresh” button (alternatively, refresh the browser).
Figure 17: Update Tab
Figure 18: Update Tab and activated Program Mode
Figure 19: Update Authorized
20