Mean Well KSR-01IP, Инструкция по эксплуатации, Страница: 25 / 30

22
Figure 22: First Additional Physical Address (First Tunnelling Address) Assignment
Figure 23: Additional Tunnelling Address Assignment in the Web Front-end
Step 2: Set the first additional physical address by the “Individual Address” field.
Click on the “Test” button. If the green appears, the first tunnelling Ok
address is set. In this example it is “9.1.241”.
Step 3: Now open the KNX tab of the Web front-end. Click on the “Set” button to set
the remaining three tunnelling addresses basing on the first tunnelling
address as follows.