MCZ Vivo 85 Hydro, Руководство по установке

Страница: 44 / 76

E A
D
C F
G
B
42
6-HYDRAULIC CONNECTION
CONTROL PANEL LOGIC
Some useful information is provided below to understand the navigation logic and use of the control panel:
• The brightness of the control panel switches off after approximately 30 seconds if the keyboard is not used. To turn the back-lighting
on again, simply press any button on the panel.
• The first screen to appear displays the product operation status (ON, OFF..) and alternates with any active settings (CRONO, SLEEP,
AUTO, ECO..)
• Press any one of the 4 keys near the display (C D E F) to enter the product operation setting screen (flame and ventilation level, set
temperature, automatic mode..). On this level, the 4 keys around the display become “dedicated” functions, i.e. they refer directly to
the words that appear in the 4 corners of the screen (ex: the word in the top right corner refers to key D).
• If you change a setting on any menu level and do not confirm it with the “OK” key, by leaving the keyboard inactive for a few seconds,
the initial screen automatically re-appears and the changes will not be saved.
• If, on any level of the menu, you press the on/off key (B) briefly, the screen automatically goes back to the initial view (product
operation status) without saving any changes that have not been confirmed with the “OK” key.
KEY
A. Display; this provides a series of information about the product, as well as the identification code of any malfunction.
B. Power on/off key (ON/OFF) or ESC (exit the menu).
C. Programme selection key (next screen).
D. Programme selection key (next screen).
E. Programme selection key (next screen).
F. Programme selection key (next screen).
G Remote control receiver (when applicable)
PLEASE NOTE It is possible to set the language on the control panel.