MCZ Vivo 85 Hydro Скачать руководство пользователя страница 22

Страница: 22 / 76

4-INSTALLATION AND ASSEMBLY

PREPARATION AND UNPACKING

The product is supplied in two packages. The pallet with the Vivo 85 Hydro product, with a box on top, with pipe, loading hatch and

ventilation grille.

Open the packing, remove the product from the pallet and place it in the selected position, ensuring it complies with the specifications.

To remove the product from the pallet, it is necessary to take out screws “x” from the base of the product.

The appliance must always be carried upright with a cart. Pay particular attention to the door and its glass, protecting them from

mechanical knocks that would compromise their integrity.

The product must always be moved with care. If possible unpack the product near the place of installation. The packaging materials are

neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user is responsible for product

storage, disposal or possible recycling in compliance with the relative applicable laws in force.

PRODUCT PACKAGING

Содержание Vivo 85 Hydro













































































Результаты поиска

Содержание Vivo 85 Hydro

Отзывы:

Похожие инструкции для Vivo 85 Hydro

Бренды по названию

Популярные бренды

MCZ Vivo 85 Hydro, Руководство по установке

Результаты поиска

Содержание Vivo 85 Hydro

Отзывы:

Похожие инструкции для Vivo 85 Hydro

Бренды по названию

Популярные бренды