MCZ Vivo 85 Hydro, Руководство по установке

Страница: 31 / 76

j
p
r
v
v
p
r
29
4-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
PULLING THE PRODUCT OUT COMPLETELY
To pull the product out completely, you need to remember to empty out the system and disconnect the pipes from the product.
When the product is partially pulled out, proceed as follows:
• lower foot “p” by removing bolt “r” and sliding out screw “v”
• turn foot “p” so that it is vertical (it must be touching the ground to provide the product with stability)
• place the previously removed screw “v” in the hole (structure-foot) and tighten bolt “r”
• remove the three screws “j” from the lower guides
• it is now possible to pull the product all the way out (Be careful of the connected pipes!)
• if necessary, adjust the stability of the product by tightening or loosening the foot