MCZ EGO-STAR Hydromatic 12 Скачать руководство пользователя

Страница: 35 / 52

21-SAFETY DEVICES AND ALARMS

TAMPERING WITH THE SAFETY DEVICES IS PROHIBITED

If the stove is NOT used as described in this instruction manual, the manufacturer declines all responsibility for

damage to persons and property that may arise. The manufacturer furthermore refuses to accept responsibility for

damage to persons and property arising from the failure to observe all the rules contained in the manual and in

particular:

• All the necessary measures and/or precautions must be adopted when performing maintenance, cleaning and

repairs.

• Do not tamper with the safety devices.

• Do not remove the safety devices.

• Connect the stove to an efficient smoke expulsion system.

• First, check that the environment where it is to be installed is properly ventilated.

Only after eliminating the cause of the intervention of the safety system is it possible to re-ignite the stove and thus

restore the probe’s automatic operation. This manual will help you understand which anomaly has occurred, and

explain how to intervene according to the alarm message displayed on the stove.

Содержание EGO-STAR Hydromatic 12





















































Результаты поиска

Содержание EGO-STAR Hydromatic 12

Отзывы:

Похожие инструкции для EGO-STAR Hydromatic 12

Бренды по названию

Популярные бренды

MCZ EGO-STAR Hydromatic 12, Руководство по установке

Результаты поиска

Содержание EGO-STAR Hydromatic 12

Отзывы:

Похожие инструкции для EGO-STAR Hydromatic 12

Бренды по названию

Популярные бренды