Dovre 280 Скачать руководство пользователя

Страница: 1 / 28

Instructions for Use, Installation and Servicing

For use in GB, IE (Great Britain and Republic of Ireland)

Dovre 280

Conventional Flue Log Effect Stove

With Upgradeable Control Valve

PR1812 Issue 2 (August 2014)

THE OUTER CASING, FRONT AND GLASS PANEL BECOME EXTREMELY HOT DURING OPERATION AND

WILL RESULT IN SERIOUS INJURY AND BURNS IF TOUCHED. IT IS THEREFORE RECOMMENDED THAT A

FIREGUARD COMPLYING WITH BS 8423:2002 IS USED IN THE PRESENCE OF YOUNG CHILDREN, THE

ELDERLY OR INFIRM.

This product contains a Heat resistant glass panel. This panel should be checked during Installation and at each servicing interval. If any

damage is observed on the front face of the glass panel (scratches, scores, cracks or other surface defects), the glass panel must be

replaced and the appliance must not be used until a replacement is installed. Under no circumstances should the appliance be used if any

damage is observed, the glass panel is removed or broken.

It is essential that ALL of the screws that retain the glass frame are replaced and tightened correctly. Under no circumstances should the

appliance be operated if any of these screws are loose or missing.

These Instructions must be left with the appliance for future reference and for consultation when servicing the appliance. Please make the

customer aware of the correct operation of the appliance before leaving these instructions with them.

The commissioning sheet found on Page 3 of this Instruction manual must be completed by the Installer prior to leaving the premises.

IMPORTANT

Содержание 280





























Результаты поиска

Содержание 280

Отзывы:

Похожие инструкции для 280

Бренды по названию

Популярные бренды

Dovre 280, Инструкция по использованию, установке и обслуживанию

Результаты поиска

Содержание 280

Отзывы:

Похожие инструкции для 280

Бренды по названию

Популярные бренды