A
23
5-ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
HOOD VENTILATION GRILLES FOR NEW CLADDING
It is mandatory to install the hood ventilation grilles of the manufacturer or grilles that can guarantee the same functions
and the same air passage section.
The company cannot be held liable for any damage caused to the structure or the electrical components if this precaution
is not complied with.
The structure becomes very hot and constant and efficient ventilation
must
always be guaranteed inside the cladding.
This allows part of the heat of the structure to be recovered that would be lost if left inside the cladding, whilst guaranteeing perfect
product operation.
The company supplies the “Blade” nozzle that is to be installed in the upper part of the insert as shown in the figure.
ELECTRICAL CONNECTION
First connect the power cable to the rear part of the product and then to a wall socket, which must always be accessible.
Should this not be possible, during installation, insert appropriate disconnecting power supply devices, in compliance with the national
regulations regarding electrical installations.
It is recommended to disconnect the power cable when the product is not used.
A - SUPPLIED “BLADE” GRILLE
