A
B
C
A
19
4-UNPACKING
Technical Dept. - All rights reserved - Reproduction is prohibited
PREPARATION AND UNPACKING
The product is supplied in a single package.
Open the package, remove the product from the pallet and set it in the pre-selected place, making sure this complies with the requirements.
The two brackets must be removed in order to remove the product from pallet, by loosening the two flanged nuts and the two screws.
The appliance must always remain in a vertical position and handled solely with a cart. Pay particular attention to the door and its glass,
protecting them from mechanical knocks that would compromise their integrity.
In any case, the product must always be handled with care. If possible, unpack the product near the place of installation. The packaging
materials are neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user is responsible
for product storage, disposal or possible recycling in compliance with the relative applicable laws.
If the product must be connected to an exhaust pipe that goes through the rear wall (to enter the flue), make sure not to force it in.
