McNeilus Street Smart Vision Extreme, Операция, обслуживание и запчасти

Страница: 19 / 56

Extreme 7" Monitor/DVR System © 2019 McNeilus Truck and Manufacturing, Inc.
15
Operation
Trigger Set up
This function tells the monitor which image/camera(s) to display when a particular trigger wire is activated.
Five different trigger wire setups can be created, and within each set up, up to four cameras can be chosen.
Distance grid function is only available if selecting the single camera configuration ( Figure 9 and Figure 10).
• Trigger Record – Select ON if you want the triggered camera to record when it appears on the screen ( Figure
10).
Figure 9 Example of Trigger Set-up. Figure 10 Trigger Wire and Camera Set-up.
• Turn Signal Delay Module (Optional)
You may need to use the 2-second off delay module PN 1452176 ( Figure 11) to retain the directional image on
the monitor screen while the turn signal is activated.
NOTE: One module PN 1452176 is used for one turn signal. If you want both the left and right turn signals
connected to cameras, you need two modules. Deutsch connectors are required, but not provided.
Pin 1
Pin 2
Pin 3
Pin 4
2-Second Off Delay
Module PN 1452176
Pin Assignments:
Pin 1 = Turn
Pin 2 = Ground
Pin 3 = Ignition
Pin 4 = Output to Camera Trigger
Figure 11