manualshive.com logo in svg

McNeilus Street Smart Vision Extreme, Операция, обслуживание и запчасти

Поделиться
Скачать
McNeilus Street Smart Vision Extreme Скачать руководство пользователя страница 51

Extreme 7" Monitor/DVR System

© 2019 McNeilus Truck and Manufacturing, Inc. 

47

Preco PreView Radar System

2.  Once the location for the sensor is tested and approved for use, the sensor may be mounted directly on the 

vehicle, or mounted using the supplied bracket (Figure 32).

Figure 32 

• 

Mount and Install the VideoLink

The VideoLink (PN 1483927) is mounted in the cab between the camera system cable and the Extreme Monitor/

DVR system. Installation of the Buzzer Kit (PN 1483944) is recommended (see 

page 49 for installation 

instructions for the buzzer kit).

1.  Disconnect the existing camera system cable from the monitor.
2. 

Connect the 1483926 Monitor Adaptor/Cable between the monitor and the camera cable.

3. 

Plug the black Deutsch connector from the 1483926 Monitor Adaptor/Cable into the VideoLink (see 

Figure 

33).

Figure 33

 1483926 Monitor Adaptor/Cable and 

1483927 VideoLink

Содержание Street Smart Vision Extreme

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды