39
SETUP, con’t
10. Using the Up or Down directional push-buttons,
select INPUT SELECT POWER ON from the On-
Screen Menu, followed by pressing the Left or
Right directional push-buttons to select OFF.
11. Using the Up or Down directional push-buttons,
select the MAIN MENU. The MAIN SYSTEM
SETUP Menu will reappear on the Monitor/TV screen
and proceed to the next step.
12. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX120 will then return to normal op-
eration. Refer to figure 7 on page 25.
Version Check
There are different versions of the MX120 to meet the re-
quirements in each country where it is sold. The MX120
can display that version information by the following steps.
13. Using the Up or Down directional push-buttons,
select VERSION CHECK from the On-Screen Menu,
followed by pressing the SELECT/OK Push-button.
MX-120 V _ . _ . _ _
DAE - _ _ _ _ V _ . _ _
NTSC VIDEO
RS232 OFF
Note: The MX120 RS232 Port Connection is controllable
when connected to an external computer with the
appropriate software.
14. Press the SELECT/OK Push-button to return to the
ADVANCED Menu.
15. Select the MAIN MENU. The MAIN SYSTEM
SETUP Menu will reappear on the Monitor/TV screen
and proceed to the next step.
16. Select EXIT from the MAIN SYSTEM SETUP Menu.
If you are satisfied with the changes that you may have
made, select YES to save those changes or NO not to
save them. The MX120 will then return to normal op-
eration. Refer to figure 7 on page 25.
Restore Defaults
The MX120 permits returning all of the previously entered
On-Screen Operating Settings back to the Factory Default
Values by the following steps.
Note: It is advisable to write down all current settings before
proceeding, in the event you desire to re-enter them
later.
17. Using the Up or Down directional push-buttons,
select RESTORE DEFAULTS from the On-Screen
Menu, followed by pressing the SELECT/OK Push-
button.
18. Using the Up or Down directional push-buttons,
select YES from the On-Screen Menu, followed by
pressing the SELECT/OK Push-button. Refer to fig-
ure 30.
19. The On-Screen Menu will give you a second chance
before the MX120 will be returned to the Factory De-
fault Settings. Using the Up or Down directional
push-buttons, select YES from the On-Screen Menu,
followed by pressing the SELECT/OK Push-button.
20. Select the MAIN MENU. The MAIN SYSTEM
SETUP Menu will reappear on the Monitor/TV
screen, proceed to the next step.
21. Select EXIT from the MAIN SYSTEM SETUP
Menu. If you are satisfied with the changes that you
may have made, select YES to save those changes or
NO not to save them. The MX120 will then return to
normal operation. Refer to figure 7 on page 25.
22. Switch the Main POWER Switch to the OFF Posi-
tion.
23. Wait two minutes, then place the Main POWER
Switch to the ON Position, then press the STANDBY
Push-button.
Figure 30
MENU: RESTORE DEFAULTS
RESTORE FACTORY DEFAULTS?
NO
Æ
YES
Figure 29
MENU: ADVANCED
HDMI OUTPUT FORMAT: AUTO
DIGITAL SETTINGS
Æ
INPUT SELECT POWER ON: OFF
VERSION CHECK
RESTORE DEFAULTS
MAIN MENU
