32
Digital Input
There are three Optical Digital Inputs and three Coaxial
Digital Inputs available for assignment with any of the eight
Audio Inputs. The following example describes how to reas-
sign Digital Input A, which by default has been assigned to
Input Number 1 PH/AUX, over to the VCR Input (6) in-
stead.
11. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right directional
push-buttons to select the PH/AUX Input Number 1.
12. Using the Up or Down directional push-buttons,
select DIGITAL INPUT on the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
push-buttons to select NONE for the Digital Input. Re-
fer to figure 17.
13. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right directional
push-buttons to select the VCR Input Number 6.
14. Using the Up or Down directional push-buttons,
select DIGITAL INPUT on the On-Screen Menu, fol-
lowed by pressing the Left or Right directional
push-buttons to select the OPTICAL A LK Digital In-
put. Refer to figure 17.
Notes: A Digital Input may be assigned to multiple
Audio Inputs. The “LK” after the Digital Input
Name indicates the MX120 will stay locked into
the Digital Mode even with an interruption of the
Signal. When the Lock is Off, the MX120 will
switch to the associate Analog Input Signal if there
is interruption of the Digital Signal.
15. Continue next to the ZONE A Analog Input Setting. If
you do not wish to perform ZONE A Analog Input Set-
ting at this time, proceed to the SURR MODE setting.
ZONE A Analog Input
The MX120 has one Stereo Balanced Input that may be as-
signed to any of the eight Audio Inputs instead of unbal-
anced (RCA Type) jacks. The AUX Input also includes the
option of connecting a Turntable with a Moving Magnet
type Phono Cartridge to PH/AUX unbalanced jacks. In the
steps below, the BALanced Input will be assigned to the
DVD Input and the PH/AUX Input will change over to a
Phono Input.
16. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right directional
push-buttons to select the DVD Input Number 5.
17. Using the Up or Down directional push-buttons,
select ZONE A ANALOG INPUT on the On-Screen
Menu, followed by pressing the Right directional
push-button to select BAL. Refer to figure 19.
Note: The BALanced Input may be assigned to multiple
Audio Inputs.
18. Using the Up or Down directional push-buttons,
select SOURCE INPUT from the On-Screen Menu,
followed by pressing the Left or Right directional
push-buttons to select the PH/AUX Input Number 1.
19. Using the Up or Down directional push-buttons,
select ZONE A ANALOG INPUT on the On-Screen
Figure 17
MENU: INPUT SETUP
SOURCE INPUT 1 -IR-PH/AUX
TITLE
AUX
Æ
DIGITAL INPUT
NONE
ZONE A ANALOG INPUT
RCA
SURR MODE
LAST
VIDEO POWER
ON
HDMI VIDEO
NONE
COMPONENT VIDEO
NONE
MAIN MENU
Figure 18
MENU: INPUT SETUP
SOURCE INPUT
6 -
IR-VCR
TITLE
VCR
Æ
DIGITAL INPUT
OPT A LK
ZONE A ANALOG INPUT
RCA
SURR MODE
LAST
VIDEO POWER
ON
HDMI VIDEO
NONE
COMPONENT VIDEO
NONE
MAIN MENU
