background image

Bad Cat Hot Cat Series Amplifier 

Owner’s Manual 

 
 
 

Welcome to the Bad Cat Family of Amplifiers 
 

Congratulations and thank you for purchasing a professional tube amplifier from Bad Cat. As 
with all Bad Cat products, your amplifier is designed from the ground up to provide the very best 
tones possible in a rugged, reliable package. Each one of our pro quality models is constructed 
with Bad Cat’s commitment to making the highest quality, hand-made, American-made 
amplifiers. 
 

Caution 
 

With a little care and caution, your Bad Cat amplifier should provide you with years of trouble-
free operation and enjoyment. Please avoid damp areas and moisture during operation of the amp 
and in storage. This includes placement of beverages near or on the amp that could spill into the 
amp’s chassis. Liquids can easily damage tubes, switches and other parts. Immediately 
disconnect the amp from power source should a spill occur and dry the amp thoroughly prior to 
switching on the amp again. Drying may require the complete removal of the chassis from the 
cabinet and the removal of the tubes for cleaning. Avoid tipping the amp, using it in unbalanced 
positions, or lifting it unassisted to awkward heights. A little common sense will go a long way 
in making sure the amp does what it’s supposed to do: provide you with dependable operation 
and great tone on a consistent basis. 
 

Grounding 
 

Please check thoroughly that the ground tip on the power cord plug is connected to true ground 
prior to operation of your Bad Cat amp. Using unfamiliar junction boxes can cause potentially 
dangerous floating grounds. Please do not cut or defeat the ground tip.  
 

Operation 
 

If this is your first all-tube amplifier. Please become familiar with a few issues that differentiate 
your amp from solid-state or hybrid amp products. Only a few precautions are required but they 
will insure that you will get the most of your new all-tube amplifier. Vacuum tubes are “old 
world” thermal devices that require more attention than transistors, but that’s the reason they 
sound so much sweeter and more musical than integrated circuits and other solid-state 
components. A little heads-up on following points will ensure maximum performance from your 
Bad Cat amp. 
 
 
 
 

Содержание Hot Cat Series










Отзывы: