4-2
©
2012 Mobile Climate Control
T-348 Rev. 07/2012
4.2 OPENING TOP COVER (EVAPORATOR)
To open either side of the evaporator assembly cover
do the following: (See Figure 4-1.)
a. Twist all 5 of the 1/4 Turn cam locks counter
clockwise.
b. Grasp the cover section under the bottom edge
and lift up.
c. Locate metal rod (prop) secured behind the evap
orator motor assemblies.
d. Lift end of metal rod (prop) and place in plate on
cover assembly.
1/4 Turn Cam Lock
(5 Places each side)
Hinge
Plate
Figure 4-1 Opening Top Cover (Evaporator)
4.3 REMOVING TOP COVER (CONDENSER)
The condenser cover assembly is of one piece
construction. To remove the cover from the
condenser assembly do the following: (See
Figure 4-2.)
a. Twist all (4) of the 1/4 Turn cam locks counter
clockwise.
b. Grasp the condenser cover section under the bot
tom edge and lift up evenly.
1/4 Turn Cam Locks
Figure 4-2 Condenser Cover Removal
