Email Protection Administrator Guide
Allow or Deny Email to or from Specific
November 2012
Proprietary: Not for use or disclosure outside McAfee without written permission
71
The Sender Allow window is displayed.
4
Click
Sender Deny
.
The Sender Deny window is displayed.
5
In the
Add Address
field, type the address of a sender whose email should be denied
without filtering.
The following values are allowed in the list entries:
•
Email addresses – Complete sender email address or partial address with
wildcards (for example,
or
g*@domain.com
)
•
Domain names – Complete domain name or partial name with wildcards (for
example,
domain.com
)
•
IP addresses – Complete IP address or partial address with wildcards (for
example,
123.123.12.3
or
123.123.12.*
)
Note:
CIDR notation is not allowed. Each IP address must be designated separately.
6
Click
Add
.
The address is added to the denied address box on the right.
7
Repeat steps 4 and 5 for each address you want to add.
8
In the
If the Sender is on the Sender Deny List
section, select one of the following
options:
•
Accept and silently discard the message
– The email is accepted, but is
discarded without notification.
•
Deny delivery
– The email is denied delivery.
9
Click
Save
.
You can save a copy of the list you created. See
Save a Copy of an Allow, Deny, or Recipient
Shield List
.