Add IP Address of Outbound Server, If Necessary
Email Protection Administrator Guide
32
Proprietary: Not for use or disclosure outside McAfee without written permission.
November 2012
Delete an Outbound Server
To delete an outbound server, perform the following steps:
1
Access the appropriate domain on the Outbound Server Setup window
2
Click the
Delete
checkbox next to the server you want to delete.
3
Click
Save Changes
.
Set up a Smart Host (If Outbound Mail
Defense is Turned on)
To ensure that your outbound email is filtered, you must designate, for each of your
outbound mail servers, an Email Protection server as your Smart Host. Your outbound
email is then relayed through Email Protection before continuing to its final destinations.
The outbound Smart Host address is listed at the bottom of the Outbound Server Setup
window, or you can refer to your
Service Activation Guide
for more details.
Note:
This task is performed on your outbound email server or servers, on your network
router, or on some other server, depending on your network’s configuration.
Add an Outbound Email Disclaimer
You can create and assign text that will be appended to all outgoing emails that are filtered
by Email Protection for the designated domain. For example, you might want to specify
that the email sent from your company is the property of your company with all right
reserved.
Note:
If no outbound package has been designated for the selected Domain, this window
is unavailable.
1
Click
Email Protection
|
Setup
|
Outbound Servers
.