McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC, Руководство по эксплуатации продукта

Страница: 106 / 328

Tasks
• Grouping agents using Agent Handler assignments on page 106
Group agents together by creating Agent Handler assignments.
• Grouping agents by assignment priority on page 107
Group agents together and assigning them to an Agent Handler that is using assignment
priority.
• Grouping agents using the System Tree on page 107
Group agents together and assign them to an Agent Handler using the System Tree.
Grouping agents using Agent Handler assignments
Group agents together by creating Agent Handler assignments.
Handler assignments can specify an individual handler or a list of handlers to use. The list that you
specify can be made up of individual handlers or groups of handlers.
When assigning agents to Agent Handlers, consider geographic proximity
to reduce unnecessary network traffic.
Task
For option definitions, click
?
in the interface.
1 Click
Menu
|
Configuration
|
Agent Handlers
, then click on the required Handler Assignment Rule.
The Agent Handler Assignment page appears.
If the Default Assignment Rules is the only assignment in the list, you
must create a new assignment. Refer to Assigning agents to Agent
Handlers.
2
Type a name for the
Assignment Name
.
3 You can configure
Agent Criteria
by System Tree locations, by agent subnet, or individually using the
following:
• System Tree Locations — Select the group from the
System Tree location
.
You can browse to select other groups from the Select System Tree and
use + and - to add and remove System Tree groups that are displayed.
• Agent Subnet — In the text field, type IP addresses, IP ranges, or subnet masks in the text box.
• Individually — In the text field, type the IPv4/IPv6 address for a specific system.
4
You can configure Handler Priority to
Use all Agent Handlers
or
Use custom handler list
. Click
Use custom handler
list
, then change the handler in one of these ways:
• Change the associated handler by adding another handler to the list and deleting the previously
associated handler.
• Add additional handlers to the list and set the priority that the agent uses to communicate with
the handlers.
When using a custom handler list, use + and - to add and remove
additional Agent Handlers from the list (an Agent Handler can be
included in more than one group). Use the drag-and-drop handle to
change the priority of handlers. Priority determines which handler the
agents try to communicate with first.
5 Click
Save
.
10 Setting up Agent Handlers
Working with Agent Handlers
106 McAfee
®
ePolicy Orchestrator
®
4.6.0 Software Product Guide