MBRAUN EasyLab, Руководство по эксплуатации

Страница: 68 / 111

Operating Manual
Operation instructions Page11-6
11.1.6 Box moisture index value alarm
Water alarm parameters interface as
shown in the left, P2 is used to set the
upper limit of the inland waters of the
warning index, when actual situation
than the set value, the system will jump
out of the oxygen on the display screen
alarm prompt
Clicking light button for 5 seconds, the
system will turn to the police P
parameter settings interface. Touching
shortly light button, P parameters
automatically from P1 to P3 switch
back and forth.
Click on the quick cleaning button,
limiting up( Long press for 3 seconds,
bits to ten and wait 3 seconds to bits)
Click on the ECO mode button ,limiting
down( Long press for 3 seconds, bits to
ten and wait 3 seconds to bits)
Mark: Maximum allowable alarm value
is 200 ppm