MBRAUN EasyLab, Руководство по эксплуатации

Страница: 32 / 111

Operating Manual
Operation instructions Page 3-10
3.4.1 Connecting the Working Gas
►
Connect the pressure-reducing valve to the working gas
source (Follow the manufacturer’s instructions for its
►
Make a supply line between the working gas source and the Working Gas IN
system connection. (The Working gas IN system connection is labelled with the
exact value for the supply pressure)
►
Set pressure reducing valve to this value and open valve.
3.4.2 Connecting the Regeneration Gas
►
Connect the pressure reducing valve to the regeneration gas
source: (Follow the manufacturer’s instructions for its connection)
►
Connect the regeneration gas source with the Regeneration Gas IN system connection
using the supply pipe (The Regeneration Gas IN system connection is labelled with the
exact value for the supply pressure)
►
Set pressure reducing valve to this value and open valve.
3.4.3 Connecting the Disposal Piping for Used Regeneration Gas
►
Connect the disposal piping between the Regeneration Gas Exhaust system
connection and the vacuum pump.
DANGER
Risk of injury and damage, risk of polluting the environment and risk
of a bad smell may be noticed when spent regeneration gas escapes
to the surroundings.
►
It is the customer’s responsibility to ensure that any required
exhaust system is provided.
MBRAUN is unaware of environmental pollution or effects
detrimental to health caused by the spent regeneration gas, but
these cannot be excluded. The manufacturer does not assume any
liability.
►
When using toxic or radioactive material, there must be no
discharge of the gas to surroundings.
See chapter 2.3 Intended Use