MBRAUN EasyLab, Руководство по эксплуатации

Страница: 35 / 111

Operating Manual
Operation instructions Page 4-2
4.1 safety instruction
We suggest professional trained staff to finish this initial installation.
Notice:
Careless manipulation of the gas system may cause danger.
System connection should be finished by experienced professional staff.
MBRAUN standard system is not suitable for processing of poisonous gas or radioactive
substance.
If need to process, you need use specialized assembly units and method to connect the
system, meanwhile, you must obey safety precaution.
This handbook has no detailed description for this part. If you need, MBRAUN after-sale
service department will provide you relevant information.
（
email
：
service@mbraunchina.com
）
4.2 System connection
4.2.1 Connect working-gas
1
．
To connect working air source reducing valve. Please refer to manufacturer
instruction book.
2
．
To connect gas source and “Working Gas INLET” and refer to chapter “Installation
preparation”
3
．
“Working Gas INLET” marks system required pressure, setting reducing valve as
required, then open it.
4.2.2 Connect regeneration gas
1
．
To connect regeneration air source reducing valve. Please refer to manufacturer
instruction book.
2
．
“Regeneration Gas INLET”
To connect regeneration gas source and “Working Gas INLET” and refer to chapter
“Installation preparation”
3
．
“Regeneration Gas INLET” marks system required pressure, setting reducing valve as
required, then open it.
Notice:
Setting pressure correctly as required.
Too high pressure will cause system damage, too low pressure will cause system unable to
run