MBRAUN EasyLab Скачать руководство пользователя страница 16

Страница: 16 / 111

Operating Manual

Operating Manual Page 2-8

DANGER

Risk of injury!

There is a risk of suffocation when working with high inert

gas concentrations. High concentration of inert gas may

lead to unconsciousness, injury or death.

Adhere to the following guidelines:

►

The selected location should have a “room” volume that is

significantly larger than the glove box interior volume.

►

The system should be located in a well ventilated area. This is

especially important during a purging procedure or when

opening an active system (i.e. antechambers, etc.).

►

All exhaust fumes should be vented through an

adequate disposal/ventilation system.

Contact

MBRAUN

if it is not possible to adhere to all the

recommendations mentioned above.

CAUTION

Risk of injury and damage!

For data on the on-site requirements, e.g.

►

Ambient conditions

►

Floor characteristics, floor loading capacity

►

Mains electricity, compressed gas, cooling and other connections

See Chapter 1.9. Storage and 3.1. Site Location

2.5.5 Observe the Operating Instructions

WARNING

Risk of injury and damage!

►

The personnel must read, understand and always work to the

operating instructions: This includes any person charged with

operation, transport, storing, installation, commissioning and

maintainance.

►

Always keep the manual within reach on the machine.

►

In addition to the safety instructions in this manual, also

observe the safety instructions in all other manuals provided

with the system.

Содержание EasyLab
















































































































Результаты поиска

Содержание EasyLab

Отзывы:

Бренды по названию

Популярные бренды

MBRAUN EasyLab, Руководство по эксплуатации

Результаты поиска

Содержание EasyLab

Отзывы:

Бренды по названию

Популярные бренды