MB Connect Line mbNET.rokey RKH 210, Руководство пользователя

Страница: 62 / 324

23.3.1 System > Settings > System Settings
Designation Description
Hostname Enter here a name that allows the router to be reached on the network.
N O T I C E
The mbNET can only be reached under this Hostname, if the DNS server that is registered on your PC
knows the device name and the IP address of the mbNET.
If the DNS server is an mbNET, you must observe the following: In order to reach the network name of the
mbNET by a PING from your PC, you'll need to add at the end an (".") (e.g.: ping myrouter.).
Host Description To better identify the router on a network, you can enter a meaningful description here.
Automatic
reboot Checkbox to activate / deactivate the reboot function.
Reboot at Enter a time here at which the device is to be restarted automatically.
24 hour format: hh : mm | 12-hour format: hh : mm AM / PM
N O T I C E
If there is an active connection for a restart at the specified time, the restart is delayed until the active
connection is ended.
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
Page 62 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |