MB Connect Line mbNET.rokey RKH 210, Руководство пользователя

Страница: 250 / 324

Designation Description
Active Checkbox for activating / deactivating the created datapoint.
Server Selection box with all previously created PLC connections.
Address Enter the tag address for this PLC connection here. For the address syntax of the dri-
ver, see table below.
Display format Selection box for the desired display format (BIN, DEZ, HEX, FLOAT). This format is
used in the status display and in the logging data.
Description Free input field.
Interval [x 100ms] In this interval, this data point is read by the PLC.
Logging If this option is activated, this tag is enabled to be logged. If this option is not activated,
the data point is only displayed on the status display.
Address syntax for the driver S7_ISOTCP
DBx.DBXy.z = data block x, data bit y.z, BOOL IDy = input double word y, DWORD
DBx.DBBy = data block x, data byte y, BYTE Oy.z = output bit y.z, BOOL
DBx.DBWy = data block x, data word y, WORD OBy = output byte y, BYTE
DBx.DBDy = data block x, data double word y, DWORD OWy = output word y, WORD
Fy.z = flag bit y.z, BOOL ODy = output double word y, DWORD
FBy = flag byte y, BYTE PIy.z = peripheral input bit y.z, BOOL
FWy = flag word y, WORD PIBy = peripheral input byte y, BYTE
FDy = flag double word y, DWORD PIWy = peripheral input word y, WORD
Iy.z = input bit y.z, BOOL PIDy = peripheral input double word y, DWORD
IBy = input byte y, BYTE Ty = Timer y, TIMER
IWy = input word y, WORD Cy = Counter y, COUNTER
Table 2: Address syntax for the driver S7_ISOTCP
Image 20: Beispiel-Datenpunkte
To edit a data point, click the edit button .
Page 250 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |