MB Connect Line mbNET.rokey RKH 210, Руководство пользователя

Страница: 160 / 324

Driver type: User settings
Designation Description
Interface Type Use this selection field to set the interface type.
The options are: RS232, RS485 2-wire, RS485 4-wire, RS422
Driver Type Select the driver type User Preferences, if no matching driver is available in the
drop-down list or if you want to make your own settings.
Driver Mode Selection field for the driver mode:
•
Standard
•
Connection state controlled DTR
Boudrate Enter the baud rate of the communication here.
Data format Select one of the settings for data bits, parity and stop bits.
Handshake Select the type of flow control.
Receive loops This is a reception counter for the serial signals.
Enter here the number of cycles that the system runs through until the data packet is
sent.
Page 160 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |