manualshive.com logo in svg

Mazda 626 1989, Руководство по ремонту

Мазда 626 1989 года - это надежный автомобиль, который требует регулярного обслуживания. Скачайте бесплатно Workshop Manual для этой модели с manualshive.com, чтобы быть в курсе всех технических особенностей и проводить эффективный ремонт и обслуживание вашего автомобиля.

Поделиться
Скачать
background image

mazoa

Mazda  North  American  Operations

 

Irvine,  CA.  92623-9734

SPECIAL SERVICE TOOL BULLETIN

Applicable Models

Subject

Bulletin No.

002/02

ALL

SST  STORAGE  CABINET  SYSTEM  (SST SCS)

Issued

02/28/02

APRIL  1,  2002  PRICE  INCREASE

Revised

DESCRIPTION

Mazda  has  four different cabinet configurations to organize  and secure your Mazda  Required Tools. All 

cabinets are shipped with  a  pre-installed  drawer liner organization  system that includes  drawer liners, 

partition/dividers  and  a Tool  Location  Index. This  index allows  users to efficiently locate and  inventory 
Mazda  Required  Tools  and other tools.  Shipment of Mazda  New Model Tool packages  automatically order 

the latest drawer liner updates to  be sent directly to  SST  SCS owners. Additional drawer liner updates  (lost 
or  missing) are  only available  on  Mazda  MNET 2000.  For drawer liner update ordering  procedure see new 

instructions  below.

MNET 2000 ORDER  PROCEDURE

Order your SST Storage Cabinet System  through 

MNET 2000, 

Mazda’s  computer-based  information  and 

order fulfillment system.  You will find  information  describing the 

MNET 2000 

order process  in the  MNET 

2000  Operations  Guide  or by using the  MNET 2000  Help feature.

PRICING

Current pricing  is  effective  until  March  31,  2002. 

Beginning April  1,  2002,  new  pricing will take effect

 

as shown  in the table below.

SST  Storage  Cabinet System

Current  Price

New Price

MAZDA-01

3  low cabinets with 21  drawers

$2,629.00

$2,849.00

MAZDA-02

3  low cabinets with 21  drawers,  and steel top

$2,849.00

$3,069.00

MAZDA-03

3  low cabinets with 21  drawers,  shelf riser,  and  3  bookcases

$3,599.00

$3,819.00

MAZDA-04

2 high  cabinets with  22 drawers

$2,629.00

$2,849.00

MAZDA-12

Opt.  steel top addition to MAZDA-01  unit

$500.00

$529.00

MAZDA-13

Opt.  3  bookcases addition to  MAZDA-02  unit

$750.00

$789.00

MAZDA-20

Replacement drawer pull  inserts (pkg.  21)

$20.00

$20.00

SPECIAL “ORDER  IN  MARCH  2002 -  PAYMENT  IN OCTOBER 2002”  DELAYED  BILLING  OPTION

 

(Expires  03/31/02)

Mazda  is offering  dealers the option  of ordering  a  new cabinet on  MNET 2000  before March  31,  2002 and 

delay payment until their October 2002  parts  account  billing statement.  This option  is only available on the 
above four cabinet part numbers:  MAZDA-01,  MAZDA-02,  MAZDA-03 and  MAZDA-04.  During this 

promotion  Mazda  MNET 2000 will automatically invoice the  October 2002 dealer parts account for the full 

SST  SCS  amount.  This offer ends on March  31,  2002 and all  SST SCS orders  placed after March  31s1 will 
receive the  normal  parts account paid  in full  monthly billing.  For more  information  on  this short term  offer 
please  call  Mazda Special  Service Tools (949) 442-6596  (Monday through  Friday,  9:00 am to 5:00  pm 
PST).

SHIPPING AND  BILLING INFORMATION

Cabinet systems are shipped  directly from  Stanley Storage.  After March  31,  2002,  MNET 2000 will 

automatically invoice the  dealer parts  account for the full  amount. All  Mazda SST Storage Cabinet 
Systems  are  special  build-to-order products and  require three to four weeks for delivery.  Please contact 

Stanley Customer Service  (1 -800-333-4444) for estimated  shipping status.

C O N S U M E R   N O T I C E :   T h e   in fo rm a tio n   and  in stru ctio n s  in  th is   bu lletin   a r e   in te n d e d   fo r   u s e   b y   s k ille d   te c h n ic ia n s .  M a z d a   t e c h n ic ia n s   u tilize  th e  p r o p e r   t o o ls  / 

e q u ip m e n t  and  taka  tra in in g  to   c o r r e c t)y  a n d   s a f e l y  m a in ta in   M a

2

d a   v e h ic le s . T h e s e  in stru ctio n s s h o u ld   n o t b e  p e r fo n r te d   b y  “d o -it - y o u r s e lfe r s .’   C o n s u m e r s  s h o u ld  

n o  I  a s s u m e   this  b u lle tin  a p p lie s  to   th e ir v e h ic le  o r  that  th e ir v e h ic le   will  d e v e l o p   th e  d e s c r ib e d  c o n c e r n .  T o   d e t e r m in e   if th e  in fo rm a tio n   a p p lie s ,  c o n s u m e r s  s h o u ld  

; c o n t a c t th eir  n e a r e s t  a u th o riz e d   M a z d a   d e a le r s h ip .

PAGE  1  OF 5

0 6 1 2 6 8

Содержание 626 1989

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 626 1989

Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Бренд: Ford Страницы: 12
BGS technic 40108 Manual preview
40108
Бренд: BGS technic Страницы: 5
Oldsmobile 1999 88 Owner'S Manual preview
1999 88
Бренд: Oldsmobile Страницы: 344
ABL eMH3 Installation Manual preview
eMH3
Бренд: ABL Страницы: 66
Navman T1 F20 User Manual preview
T1 F20
Бренд: Navman Страницы: 10
Macrom EF-AR1-5561 Manual preview
EF-AR1-5561
Бренд: Macrom Страницы: 10
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Бренд: BMW Страницы: 5
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Бренд: Coolster Страницы: 45
Ford Fusion 2019 Supplement Manual preview
Fusion 2019
Бренд: Ford Страницы: 51
Brainz 38508 Instruction Manual preview
38508
Бренд: Brainz Страницы: 2
Reese 50085 Installation Instructions Manual preview
50085
Бренд: Reese Страницы: 21
Mazda 2011 CX-9 Owner'S Manual preview
2011 CX-9
Бренд: Mazda Страницы: 605
Westin 40-1245 Installation Instructions preview
40-1245
Бренд: Westin Страницы: 2
X-Armour XR-9500 Installation And Owner'S Manual preview
XR-9500
Бренд: X-Armour Страницы: 16
Road Ranger ET 210207 Installation Instruction preview
ET 210207
Бренд: Road Ranger Страницы: 3
Paser SKT 170 HYUNDAI Installation Manual preview
SKT 170 HYUNDAI
Бренд: Paser Страницы: 4
Yakima PR3041 Fitting Instructions Manual preview
PR3041
Бренд: Yakima Страницы: 13
Prorack K129 Fitting Instructions Manual preview
K129
Бренд: Prorack Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды