manualshive.com logo in svg

Mazda 626 1989, Руководство по ремонту

Мазда 626 1989 года - это надежный автомобиль, который требует регулярного обслуживания. Скачайте бесплатно Workshop Manual для этой модели с manualshive.com, чтобы быть в курсе всех технических особенностей и проводить эффективный ремонт и обслуживание вашего автомобиля.

Поделиться
Скачать
background image

SPECIAL  SERVICE TOOL  BULLETIN

—

Maz da  North American  Operations

I   I  

tO A O O

 

Irvine,  CA 92623-9734

Applicable Model/s 

Miata

Subject

SHIPMENT OF SPECIAL  SERVICE  TOOLS 

DURING  JUNE  2001

Bulletin  No.

003/01

Issued

06/6/01

Revised

DESCRIPTION

The  Mazda  Special  Service  Tools  (SSTs)  illustrated  on  the following  pages,  will  be automatically shipped  to your 
service department by Mazda's tool vendor,  America  Kowa  Seiki,  Inc.  These tools  are the  latest addition to the 

Mazda  Required  Tools  (MRT) list and  can  be found  on  Mazda  MNET 2000.

APPLICATION

These tools are used to properly service the  Miata  Six-Speed  Manual  Transmission.  Please  refer to your Work­
shop  Manual  Supplement for the  application of these tools.

PRICING

The total  price for these tools  is $577.52  plus applicable tax and  shipping  costs.

SHIPPING AND  BILLING  INFORMATION

These tools will  be shipped  via  UPS to your service  department during  the week of June  18,  2001.  If necessary, 

please  use  Mazda  MNET Order Tracker to track your shipment. Your dealer parts  account will  be automatically 
invoiced for these tools  and  if your Accounting  Department has  questions  regarding this  invoice  please  call 
Mazda  Special  Service  Tools  (949-442-6596). 

Do not send your payment to America  Kowa Seiki,  Inc. And

 

advise your shipping 

I

 receiving  personnel  of this tool  shipment.

MNET 2000 ORDER PROCEDURE

Please submit any additional  Mazda  Special  Service Tool  orders  through  MNET 2000,  Mazda's  computer-based 
information and  order fulfillment system.  You will find  information  describing the  ordering  process  in the  MNET 

2000 Operations  Guide.

CUSTOMER  SERVICE

Mazda's tool  supplier,  America  Kowa Seiki  (800-824-9655),  will ship the tools  to your service  department.  Please 

call  this toll-free  number for warranty questions,  product information,  pricing,  shipping,  and  ordering  assistance. 

Customer Service  Representatives are available from  9:00 AM  until  5:00 PM  PST,  Monday through  Friday.

SST STORAGE  CABINET SYSTEM  UPDATE  INFORMATION

Update information  will  be sent to your Service Department enclosed  in drawer numbered  envelopes.  This  infor­
mation will consist of easy update  instructions,  drawer liner/index update stickers,  and any necessary drawer 

dividers.

Please  contact your  District Customer Support Manager,  America  Kowa Seiki  Customer Service  (800-824-9655 

or 562-407-5860) or Mazda  Special  Service Tools  (949-442-6596 or [email protected])  if 

you  have  any questions  regarding this  information.

C O N S U M E R   N O T I C E :   T h e   in fo r m a t io n   a n d   in s t r u c t io n s  in   th is  b u lle t in   a r e   in t e n d e d   f o r  u s e   b y  s k ille d   t e c h n ic ia n s .   M a z d a   t e c h n i c i a n s   u t iliz e   t h e   p r o p e r  t o o l s   / 

e q u i p m e n t  a n d   t a k e   tr a in in g   t a   c o r r e c t l y  a n d   s a f e l y   m a in t a in   M a z d a   v e h i c l e s .   T h e s e   in s t r u c t io n s   s h o u ld   n o t  b e   p e r f o r m e d   b y  " d o - i t - y o u r s e l f e r s . "  C o n s u m e r s  

s h o u ld   n o t a s s u m e   th is   b u lle tin  a p p l i e s  t o  t h e ir  v e h i c l e  c r  t h a t  th e ir  v e h i c l e   w ill d e v e l o p   t h e  d e s c r i b e d  c o n c e r n .  T o  d e t e r m i n e   if t h e   In f o r m a t io n  a p p l i e s ,   c o n s u m e r s  

s h o u ld   c o n t a c t  Ih e i r   n e a r e s t  a u t h o r i z e d   M a z d a   d e a l e r s h i p .

0 6 1 1 8 5

PAGE  1  OF 3

Содержание 626 1989

































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 626 1989

Mazda 2012 Mazda6 Owner'S Manual preview
2012 Mazda6
Бренд: Mazda Страницы: 527
Cadillac 2008 Escalade EXT Owner'S Manual preview
2008 Escalade EXT
Бренд: Cadillac Страницы: 496
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Бренд: Saleen Страницы: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Бренд: Buick Страницы: 5
Yakima K831 Manual preview
K831
Бренд: Yakima Страницы: 8
Phonocar VM338 Mounting Instructions preview
VM338
Бренд: Phonocar Страницы: 6
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Бренд: Volvo Страницы: 188
GMC Chevrolet Silverado 2500HD 2021 Owner'S Manual preview
Chevrolet Silverado 2500HD 2021
Бренд: GMC Страницы: 433
Mercedes-Benz R 350 2012 Operator'S Manual preview
R 350 2012
Бренд: Mercedes-Benz Страницы: 368
Kuda 079020 Installation Instruction preview
079020
Бренд: Kuda Страницы: 2
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Бренд: Nav TV Страницы: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Бренд: Saab Страницы: 304
Navman T1 F20 User Manual preview
T1 F20
Бренд: Navman Страницы: 10
Macrom EF-AR1-5561 Manual preview
EF-AR1-5561
Бренд: Macrom Страницы: 10
Thule Kit 1312 Instructions Manual preview
Kit 1312
Бренд: Thule Страницы: 8
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Бренд: Jaeger Страницы: 16
Brodit ProClip 854676 Quick Start Manual preview
ProClip 854676
Бренд: Brodit Страницы: 2
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Бренд: Volvo Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды