Maytronics Dolphin WAVE 300 XL, Инструкция пользователя

Страница: 13 / 20

Wave XL | User Instructions
11
Manual procedure for configuring pool profiles
1. From the Wave screen, press Menu .
2. From the Main Menu screen, with Pool
Profile highlighted, press Select and then
modify , to display the current active profile
screen.
3. Using the Select and scroll buttons
 
,
set each parameter in turn.
4. Press Select to enter the Pool Length Setup
screen.
5. With Pool Length highlighted, press Select .
The Pool Length Set Up screen is displayed:
6. Using the arrows
 
select the desired
pool length. Press Select and scroll down to
the next parameter, Cycle Time .
Cycle Time determines the duration of each
cleaning cycle.
7. Set each parameter and then scroll down to
the next line.
8. Set Pool Type and choose either Rectangular
(Default), or Shaped.
Rectangular - Recommended for pools with
parallel walls and 90º ‘L’ shape.
Shaped - Recommended for free formed
pools.
9. Set Scan Mode and choose either CrissCross,
Lines to scan or Pool with Obstacles.
CrissCross - Recommended.
Lines to Scan - To be used when the pool
scan needs to be limited to one direction
or split into 2 sections.
Pool with Obstacles - To be used in pools
with an obstacle such as Island.
10. After choosing the ”Scanning Mode”
you may choose the robot’s progress
direction - “Lines to Left” or “Lines to Right”.
Select Back
Pool Length 25 m.
Cycle Time 3 h.
Pool Type Rect
Scan Mode Criscros R
Pool A Profil
Figure 11: Pool A menu: first screen
Set Back
Pool Length Set Up
ft.
Meters
25 30 35 40 50 60
Figure 12: Pool length setup screen
Set Back
CrissCross
Lines to Scan
Pool with Obstacles
Scannig Mode
Figure 13: Scanning mode
Set Back
Lines to Left
Lines to Right
CrissCross Scanning
Figure 14: Scanning Direction screen