WWW.HAYWARDPOOL.COM USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
P/N: IS3600
Rev. A
__________________________________________________________________________________________
OWNER’S MANUAL
INSTALLATION, OPERATION, & PARTS
TriStar
™
75/120 GPM Waterfall Pump Series
The Hayward TriStar Waterfall Pump is specifically engineered for high volume waterfall, spillway, and negativeedge pool
applications, where quiet and efficient delivery of water through low restriction systems is required. It is not intended to be used as
the main pump for the pool water filtration/sanitization system, nor is it intended to be used in applications where water will be
elevated more than (10) feet above the surface of the water in the pool.
NOTE
To prevent potential injury and to avoid unnecessary
service calls, read this manual carefully and completely.
IMPORTANT – READ CAREFULLY
NOTE
The TriStar Waterfall pump uses a lowspeed motor specifically designed for waterfall, spillway, and negativeedge pool
applications.
Use only the motor listed on page 12 of this manual as a replacement.
Required:
2” plumbing minimum
Recommended: 2 ½” plumbing or larger
SAVE THIS INSTRUCTION MANUAL
HAYWARD POOL PRODUCTS, INC.
620 DIVISION STREET ELIZABETH, NJ 07207 (908) 3515400
WWW.HAYWARDPOOL.COM
