______________________________________________________________________________
Page 27
OUTPUT SIGNALS
In the basic version (without extension board) a collective
malfunction message is
always
available on output 8 (Pin
12/ 23). This message can be processed via an optional
signal relay.
With the option "I/O extension board" further 5 freely configurable output signals are
available.
OUTPUT SIGNALS
OUTPUT SIGNAL 1
OUTPUT SIGNAL 2
OUTPUT SIGNAL 3
OUTPUT SIGNAL 4
OUTPUT SIGNAL 5
Each output signal (1-5) can be programmed individually according to the following list:
• PROGRAM ACTIVE
Selection:
„PROGRAM ACTIVE" or
„PROGRAM XX ACTIVE"
• PROGRAM TERMINATED
Selection:
"PROGRAM TERMINATED" or
"PROGRAM XX TERMINATED"
• ERROR ACTIVE
Selection:
„ DELETE ERROR“
„ GENERAL FAILURE“
„ ERROR ELECTRODES“
„ ERROR SUCTION“
„ ERROR DISTRIBUTOR“
„ MAX. SPL/BOTTLE „
„ ERROR ANALOG SIGNAL A1“
„ POWER FAILURE“
„ DOOR OPEN“
„ INTERNAL TEMPERATURE“
„ EMERGENCY CUTOFF“
„ SUCTION TIME“
• SAMPLING ACTIVE
• BOTTLE CHANGE
• DISTRIBUTOR ON POS. 1
• MESSAGE INVERTED
• OUTPUT SIGNAL OFF
(switch off/reset of the output signal)
