______________________________________________________________________________
Page 16
SPECIAL PROGRAM FUNCTIONS
Beside the standard programming features the unit also offers the following special
functions:
PROGRAMS
CHANGE
TIME/FLOW/EVENT
MORE SETTINGS
SPECIAL FUNCTIONS
If "
MORE SETTINGS
" has been chosen, the following special functions are available
depending on the single operating modes:
-
PROGRAMMING OK
When all the desired settings have been entered, and
this function is selected all settings are confirmed and
the display returns to the START menu.
-
SERIAL SAMPLES
Number of samples per sample extraction means that each requested sample
extraction consists of x samples. If e.g. the value 3 is
entered, 3 samples are extracted successively. When
activating this function, particular attention has to be
paid to the bottle volume in order to avoid overfilling.
This function is useful if several single sample
extractions shall be effected in a very short time
to obtain a bigger sample volume.
-
BOTTLE ASSIGNMENT
(First bottle / last bottle)
The first and the last bottle of a sampling cycle can be
defined. With this function a
group of bottles
can be
assigned to a certain program. An activation of this
function is recommended if the function “Program
linkage” is
used. The bottle group is always defined by the settings
“first bottle” and ”last bottle”.
Example:
In program 1 bottle
1
up to bottle
6
and
in program 2 bottle
7
up to bottle
12
are selected.
Thus, after the start of program 1, bottles 1 – 6 are filled accordingly and after
the start of program 2, bottles 7 – 12 are filled.
