______________________________________________________________________________
Page 13
• OUTPUT SIGNALS
REMARK
:
this feature is only available in
connection with an I/O add-on board
(5 output signals).
In the basic version (without add-on board) 1
fixed output is available for the collective
malfunction message which can be used via an
optional signal relay.
With this feature, however, the possible
(malfunction) messages can be configured
individually for each of the 5 signals.
SLEEP MODE
Only at portable samplers:
•ACTIVE
If the sleep mode has been activated and the
program is to be started in 20 min. at the earliest,
the message „Attention device switches to sleep
mode“ is displayed for 30 sec.
Thereafter the display is switched off and only
activated again 2 min. prior to the program start.
• INACTIVE
Sleep mode is deactivated
PASSWORD
• CHANGE PASSWORD
- In general the password can be changed.
• CHANGE SETTINGS
- A password for settings can be entered.
• CHANGE PROGRAMS
- A password for changing programs can be
entered.
• STOP PROGRAMS
- A password for stopping programs can be
entered.
SERVICE
Setting of base parameters (only to be done by a
service technician)
(Password protected)
