Maxwell MW-1156 W, Инструкция по эксплуатации

Страница: 8 / 32

8
ENGLISH
plug of the unit into water or any other liquids. If the
unit was dropped into water:
– do not touch the water;
– unplug the unit immediately, only after that you
may take the unit out of water;
– apply to an authorized service center for testing
or repairing the unit.
•
Keep the unit out of reach of children under 8 years
of age.
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE
ONLY
BEFORE USING THE UNIT
After unit transportation or storage at low tem-
perature, it is necessary to keep it for at least
two hours at room temperature before switch-
ing on.
•
Before using the unit, wash the blender attach-
ment (1), the whisk (9), the chopping knife (6), the
measuring cup (10) and the chopper bowl (5) with
warm water and a neutral detergent.
•
Wipe the motor unit (2), the whisk gear (8) and the
geared lid (7) with a soft slightly damp cloth, then
wipe them dry.
Attention!
– Do not immerse the motor unit (2), the whisk
gear (8), the geared lid (7), the power cord and
the power plug into water or any other liquids.
– Do not put the attachments and bowls in a
dishwashing machine.
Continuous operation time
•
Continuous operation time with attachments
should not exceed 30 seconds.
•
Make at least a 3-5 minute break between opera-
tion cycles.
USING THE BLENDER ATTACHMENT
WARNING: Before assembling and installing
attachments, make sure that the power plug is
not inserted into the socket.
–
Attach the blender attachment (1) to the motor unit
(2), matching the mark

on the motor unit (2) with
the mark on the blender attachment (1) and
turn it counterclockwise till bumping. The mark

should match the mark on the blender attach-
ment (1) in the fixed position.
•
Insert the power plug into the mains socket.
•
Immerse the blender attachment (1) into the bowl
with products that you want to chop/mix.
–
To switch the blender on, press and hold the but-
ton (3). Use this operation mode for mixing liquid
products.
•
If you press and hold the button (4), the unit will
operate at maximum rotation speed. Use this oper-
ation mode for combined processing of liquid and
solid products.
Note:
–
Products should be put into the bowl before the
unit is switched on. The amount of processed
products should not exceed 2/3 of the capacity of
the bowl in which they are processed.
–
Before you start chopping/mixing, we recommend to
peel fruit, remove inedible parts, such as stones, and
cut fruit into cubes of approximately 2х2 cm in size.
•
After you finish using the blender, unplug the unit
and remove the blender attachment (1) by turning
it clockwise so the mark
 on the motor unit (2) is
opposite the mark .
Attention!
•
Do not remove the blender attachment (1) dur-
ing operation.
•
To avoid damaging the blades, do not process
too hard products such as cereals, rice, spic-
es, coffee beans, cheese, frozen products.
•
When you use the blender attachment and the
products are hard to chop, add some water, if
it is possible.
USING THE WHISK
Use the whisk attachment (11) only to beat cream,
make biscuit dough or to mix ready desserts.
WARNING: Before assembling, make sure that the
power plug is not inserted into the mains socket.
– Insert the whisk (9) into the whisk gear (8).
– Attach the whisk gear (8) to the motor unit (2),
matching the mark
 on the motor unit (2) with the
mark on the whisk gear (8) and turn it clock-
wise till bumping. The mark  should match the
mark on the whisk gear (8) in the fixed position.
– Insert the power plug into the mains socket.
– Sink the whisk (9) into the bowl with products.
– To switch the blender on, press and hold the but-
ton (3). Use this operation mode for mixing liquid
products.
–
If you press and hold the button (4), the unit will
operate at maximum rotation speed.
–
After you finish using the unit, take the power plug
out of the socket, disconnect the whisk (9) from
the whisk gear (8) and disconnect the whisk gear
(8) from the motor unit (2) by turning it counter-
clockwise so that the mark
 on the motor unit (2)
is opposite the mark .
Attention!
1.
Do not use the whisk (9) to knead stiff dough.
2. Products should be put into the bowl before
the unit is switched on.
MW-1156.indd 8 15.01.2014 9:16:08