MaxTronic Orion 410ST, Руководство пользователя

Страница: 95 / 100

85
Appendix
Orion 410ST FTP Setting Guide
If only one fixed public IP is available and the Orion 410ST is located behind the NAT, you
will need to set up a passive IP address and port.
1 First, check the ‘Manually Passive IP address and
port’ box to enable them.
2 Then enter a passive IP address by the only one
fixed public IP address available.
The Orion 410ST uses a passive port range of 30000-
50000 as default. Under normal circumstances, there is
no need to change this unless the range is being used for
other purposes. Please see the graphic below for
detailed information.
IP sharing unit setup (Broadband Router)
The Orion 410ST supports FTP usage when only one fixed public IP is available (as
described earlier). The IP sharing unit (broadband router) will need to be set up correctly to
work with this feature.
There are various IP sharing units (broadband routers) provided in the market and we are
unable to go through each of them.
The key factor to choose an IP sharing unit is to
make sure it can set up a user-defined virtual server with all ports as well as a
configurable port range.
The IP sharing unit (broadband router) will need to add four virtual servers:
1 NAS_FTP
2 NAS_AFP
3 NAS_WEB
4
Passive_FTP_Data
IP sharing unit (Broadband Router)
D-link DI704up
Connect the DI704up with the default IP address. This is usu-
ally 192.168.0.1. Please note that this IP will vary from
model to model.
Under the advanced tab, add the 4 virtual servers. Follow the
steps below.